Showing posts with label hybrid cars. Show all posts
Showing posts with label hybrid cars. Show all posts

Honda Jazz Hybrid at Paris Motor Show

Honda Jazz Hybrid launch world's first appearance at the Paris Motor Show. Jazz Hybrid is a hybrid car that combines a conventional engine that uses gasoline as a fuel with an electric motor Integrated Motor Assist (IMA).

Jazz Hybrid bearing the gasoline engine with a capacity of 1.3 liter, 4 cylinder, equipped with intelligent variable valve timing and lift electronic control (i-VTEC), and assisted by an electric motor (IMA). With the help of electric motors, carbon dioxide emissions Jazz Hybrid only 104 grams / km. Gasoline consumption were pretty efficient, only 23 km / liter.

As such Hybrid Jazz is much more economical fuel consumption than the second generation Jazz.

Gasoline consumption of a car is determined by the quality of gasoline, weather, traffic conditions and the way the car driving. That's why the factory test data is always higher than the test data on the highway because testing in the factory conditions are ideal.
read more...

BMW Hybrid Sport Car Just Got Sexy

We all know that sooner or later all automobiles are going to be either hybrid, electric or hydrogen powered. The one drawback that many of us look at is the overall appeal of the cars. Very few models that are being put out are really all that attractive. For those of us that like to put the pedal down every now and again, there are very few options to consider. That is about to change in a big way. BMW has recently hit the board with their prototype that is just flat out sexy.

This is a hybrid sports car that will hopefully hit the market in 2013 and it is unlike anything else on the market. Having access to 356-horsepower and 4.8 second 0-60 speed has speed freaks sitting up and taking notice that there may actually be a car out there that is both economical and fast.

The 63 mpg tag that it boasts is absolutely unreal in terms of conservation. The combination of electric and diesel offers mileage that is up there with pure electric cars. The difference here is of course the design. This car looks like it belongs on the race track instead of the local BWM showroom floor. The big question is whether it will ever come to fruition or not.

Just how committed is BMW to producing a car such as this and how much will it cost? According to a variety of sources, BMW expects to make up to 10,000 units, but a price tag has yet to be determined. Based on their ActiveHybrid 7, figure that it will cost well over $100,000 for the right to sit in the driver’s seat of this machine.

While it is great to see a company like BMW put a product like this on the market, it is even more exciting to see the image of the dull and goofy looking hybrid shattered. Most hybrid and electric cars are hardly aerodynamic or built to be aesthetically pleasing. This new BMW hybrid sports car release shows that we can have the best of both worlds. It will truly bring in a new era of hybrid and electric car design.

If the car is released as expected and meets with success, it will surely open up a whole new niche. Up until now, the high end electric sports car has been a market that few companies are willing to take a chance. For some reason, it is as though auto makers think that just because we like to go fast, we could care less how much fuel we are burning in the process. Now there will be an opportunity to tear up the roads and keep some cash in our pockets.
(alternative energy)
read more...

New Range Rover Sport Hybrid by 2012

Land Rover has recently declared that they are going for a new Range Rover Sports Hybrid. They are taking care of the carbon emissions. According to them this car will emit just 100g/km of CO2 and will have an all-electric range of 20 miles. If it can be achieved, the low CO2 figure will be a noteworthy breakthrough for the luxury brand.
This low carbon emission will put the Range Rover Sport’s carbon emissions in an equal category with those of smaller, lighter vehicles like the Citroën C1 and Ford Focus Econetic which emits 148g/km of CO2. Land Rover is planning to launch five prototypes of the vehicle next year ahead of a 2012 sales launch.

The Range Rover Sport Hybrid will operate on a 3.0-liter V6 engine, which will work in tandem with a 25KW electric motor. Land Rover often comes up with a number of different hybrid propulsion systems. They try to be different from what is available in the market. But this Range Rover Sport Hybrid will be somewhat similar to Toyota’s Prius. You can drive this hybrid Range Rover on an all-electric mode basis as well. Land Rover is still playing safe as far as the storage system is concerned. Their first-generation hybrid vehicle will utilize traditional storage systems. They are not opting out for the ultra-capacitors that the company has been testing. Ultra-capacitors are known for delivering high voltages but low currents. The technology is said to be compatible with the needs of the Land Rover because the short, sharp energy boost that capacitors can deliver is well suited to off-road driving.

Range Rover Sport Hybrid people are unwilling to go for the advanced ERAD (electric rear axle drive) design. This design was showcased last year in the Freelander. Land Rover has preferred a more conventional hybrid set-up. ERAD prototypes incorporate a small 35-kW electric motor fitted into the rear axle. ERAD’s motor has the capability to directly power the rear axle. With the help of a Haldex differential and a propeller shaft, it could also drive all four wheels without the use of the turbo-diesel power plant.

According to Kevin Stride, Jaguar’s chief engineer, the British marque that is owned by the TATAs of India too are developing a plug-in hybrid system that will get its primary power from an electric motor, with a small traditional petrol engine functioning as a backup.
read more...

Power Electronics could make Hybrid Cars Cheaper

Hybrid cars are often known as "cars of the era". The main feature of the hybrid car is that when we start the car engine, electrical energy is used. This way it helps in keeping a tab on the tail pipe emissions. The use of automobiles is increasing in every part of the globe and so is the threat of toxic pollutants and global warming, thanks to their exhaust ingredients. But if we are using a hybrid car the decrease in the tail pipe emission will do a great service to the environment and society. After starting the engine of the hybrid car fasiline engine will take up the charge.
If we want to increase the speed, gasoline is essential to attribute the pace for the drive. While waiting at the traffic signals, maneuvering your car in a heavy traffic and climbing on steep slopes, the electrical energy will be again activated. This way hybrid vehicle minimizes the use of gasoline. We should not forget breaking the notorious fuel consumer. In hybrid cars while we apply breaks it is re-channeled for the electrical battery charging, known as regenerative braking, and a separate energy for battery charging is not required.


Earlier hybrid cars were considered as rare breeds but presently we can spot more and more such vehicles on the road. But still they are not produced on commercial scale. Therefore they are costly. Not all that long ago, hybrid vehicles were still really exotic. Now, you see them more and more frequently on our roads. However, hybrid cars are not mass-produced as their production costs are still relatively high. Hanna Plesko - a researchers from ETH Zurich has given this problem a serious thought. Currently she is doing her doctorate at Power Electronic Systems Laboratory. She is developing a new concept as part of her doctoral thesis that integrates power electronic functions and an electric motor. This combination has the 'power' to reduce the costs of hybrid cars.

Hollywood stars scuh as Leonardo DiCarprio and Cameron Diaz are doing their bit by raising awareness about clean and green vehicles. They had proudly strutted their hybrid cars and driven up to the red carpet. Researchers are doing their work on making hybrid cars available to the commoner n the street. Hanna Plesko, utilizes public transport everyday to do her research on hybrid cars and the sweet irony is that she doesn't have her own car.

Plesko is familiar with the ground realities as she says, "It's rumored that hybrid vehicles can improve your image, but in some cases the automobile companies have difficulties to cover their costs". The production of hybrid drives is stil very expensive and the main culprits are the electric motor and the power electronic energy management system, in which inverters and DC/DC converters play a crucial role.
They eat up the major chunk of money. Plesko is dealing with these two mechanisms. She is approaching the problem applying a new concept. She is focusing on the components, in example the power electronics and the electric motor. They might perform several functions simultaneously. The multiple uses of the electronic parts and teh motor also save volume. This will help in reducing the costs.

In traditional hybrid vehicles, batteries are utilized to provide energy to electric motor, radio, ventilation and the lights. Unlike the electrical drive system, for which a high DC voltage of 200-600 V has to be converted into a three-phase AC voltage, a low DC voltage of 12V is sufficient to power a car radio.
Inverters are devices which convert the direct current into an alternating current. DC/DC converters transform the power between the two batteries for the two voltage levels. Threfore we can easily conclude that converters are significant power electronic mechanisms in hybrid or electric vehicles. These days converters are situated outside the electric motors.

A research group "Future Automotive Power Electronic's headed by senior scientist Jurgen Biela, is working towards the converters. Plesko is focusing on a mechanism that integrated the inverter, the DC/DC converter and the electric motor functionally. By combining the function of the drive and the DC/DC converter, certain electronic constituents and the motor lamination stack can be shared. If we angle it from a manufacturers point of view we will see that large quantities of such functionally integrated systems will be cheaper as smaller number raw materials are required. Moreover, Plesko's design is less complex, making it easier to produce.
read more...